4Press the close button before playing another video
Keycreator. Using the Feature Removal tool : Part 2 of 2
Keycreator. Using the Feature Removal tool : Part 1 of 2
Part 5 of 5 : Cleaning a poor solid in Keycreator. The solid was imported via IGES and contains errors
Part 4 of 5 : Cleaning a poor solid in Keycreator. The solid was imported via IGES and contains errors
Part 3 of 5 : Cleaning a poor solid in Keycreator. The solid was imported via IGES and contains errors
Part 2 of 5 : Cleaning a poor solid in Keycreator. The solid was imported via IGES and contains errors
Part 1 of 4 : Cleaning a poor solid in Keycreator. The solid was imported via IGES and contains errors
Using Midsurface Intersect in Femap : This command simplifies model creation inside Keycreator and isa potential timesaver
Using Edge Glue in Femap : A comparison of edge connections is made and detail is given of possible pitfalls
Using the Glue feature in Femap to attach Keycreator parts prior to analysis. The video shows a simplistic approach to assigning glue and goes on to show an analysis and post-processing
Using the Glue feature in Femap to attach Keycreator parts prior to analysis. The video shows how effective bolt clamping zones are created inside Keycreator for use in Femap
Splitting surfaces inside Keycreator so that loads/restraints can be applied in Femap to these areas
Using Keycreator to aid in the creation of Femap models
4
Press the close button before playing another video
